Iceross Seal-In X5

For transtibial (below knee) and transfemoral (above knee) amputees

Step in and GO to the next level: The Iceross Seal-In liner just got better!

The new Iceross Seal-In X5 incorporates a series of five seals that conform to the shape of the residual limb and the internal socket wall, providing an airtight seal. For lower-limb amputees who prefer a suction liner, liberation from the restriction of a sleeve means more freedom of movement, increased comfort and simplified maintenance.

The TF version of the X5 liner (for above knee amputees) is available in standard and conical profile.
The TT version (for below knee amputees) is both available as standard and with Waves, for easier flexing at the knee.

Instruction For Use for Iceross Seal-In X5 TT/TF version (in pdf format, opens in a new window)

Technical Manual for Iceross Seal-In X5 TF version (in pdf format, opens in a new window)

Benefits

• Comfort - The seals conform easily to the circumference of the residual limb, distributing pressure evenly and avoiding uncomfortable pressure peaks.
  
• Control  - Increased surface contact with the socket wall ensures more effective pistoning and rotation control, effectively minimizing socket rotation.

When fitting the Iceross Seal-In X5 liner

When fitting the Iceross Seal-In Liner a one-way, auto expulsion valve with push-button suction release MUST be used. Standard one-way valves without a release mechanism feature to allow air back into the socket will not allow the socket to be removed.

Iceross Seal-In X5 Product Overview

Selection criteria for TT & TF For low to high active users For lower limb amputees preferring a suction liner Users who need/prefer more freedom of movement – easier flexion at the knee (Waves option only) Sizes TT: 18; 20; 22; 23,5; 25; 26,5; 28; 30; 32; 34; 36 TF Standard: 25; 26,5; 28; 30; 32; 34; 36; 38; 40; 45; 50; 55 TF Conical: 25; 26,5; 28; 30; 32; 34; 36; 38 Warranty Six-month limited warranty CE marked and produced to ISO 9001 and ISO 13485 quality system standards Product numbers (xx indicates size)  Iceross Seal-In X5  Number  Suspension method  Silicone  Profile  Matrix    I-3663xx Seal-In, serial Dermo  3mm TT  10-13cm, size dependent  I-3664xx Seal-In, serial Dermo  Wave 3mm TT  10-13cm, size dependent I-TF673xxx Seal-In, serial TF DermoSil  3mm Standard TF Full length   I-TF678xxx Seal-In, serial TF DermoSil  3mm Conical TF  Full length

 

Back